How To Install A Reese Tow Bar

Installation of the Haul Chief Tow Bar

past Thomas West

Archetype muscle car with mustang image by patrimonio designs from Fotolia.com

Haul Master refers to a line of towing accessories sold past the Harbor Freight Company. Harbor Freight started business in 1968 selling tools at a reasonable price through mail service order catalogs and retail store locations. The Booty Primary tow bar is designed to tow a vehicle on all four of its wheels behind a tow vehicle. The tow bar mounting brackets attach to the front end of the vehicle being towed. Once this is washed, the tow bar can exist quickly attached to the brackets and to your tow vehicle'southward trailer hitch.

Step 1

Loosen the left and right bar holding bolts on the head of the tow bar associates with an adjustable wrench in a counterclockwise management. Swing the left and right bars away from each other.

Footstep 2

Remove the mounting brackets from the left and right confined on the tow bar assembly by turning out the property bolts with an adjustable wrench turned in a counterclockwise direction. Set the bolts bated.

Stride three

Select a location on the forepart of the vehicle to be towed to mountain the tow bar mounting brackets. Hold the bracket in place and make marks through the mounting holes and onto the tow vehicle's mounting surface with a felt-tipped pen. Ready the mounting brackets aside.

Step four

Drill through the marks on the tow vehicle with a ane/2-inch drill flake installed into an electrical drill. Attach the mounting brackets to the tow vehicle with the bolts supplied with the tow bar. Line up the holes in each mounting subclass with the holes you drilled. Run bolts through the holes and secure them with a lock nut tightened in a clockwise direction with an adjustable wrench.

Footstep 5

Attach the tow bar assembly to the mounting brackets on the front of your tow vehicle. Place the mounting hole in the end of the left and correct bars into the holes in the mounting brackets. Re-install the original holding bolts through the holes and secure with lock nuts tightened with an adjustable wrench in a clockwise direction.

Step 6

Tighten the left and right bar belongings bolts on the caput of the tow bar with an adjustable wrench turned in a clockwise management.

Back your tow vehicle up to the towed vehicle and lower the tow bar coupler to the trailer hitch ball on your tow vehicle. Slide the hitch brawl coupler on the tow bar hitch head until information technology locks into place.

References

Tips

• All mounting hardware, such as bolts and lock basics, comes with your tow bar assembly.
• When selecting a location to adhere the tow bar mounting brackets to the front of your towed vehicle, select a solid surface, such as the vehicle'south frame or front bumper. Make sure the area selected tin can support the weight of the towed vehicle and has a thickness of not more than 5/8-inch. The brackets must exist mounted on each side of the forepart of the towed vehicle no less than 24-inches apart just not more than than 43-inches apart.

Things You'll Need

• Adjustable wrench
• Felt tipped pen
• Electric drill
• one/2-inch drill bit

More Manufactures

Source: https://itstillruns.com/installation-haul-master-tow-bar-5994585.html

Posted by: cruzhiscre.blogspot.com

Share this post